|
LIST OF MACHINERY & TESTING EQUIPMENTS
|
| Name of machinery | Capacity | Qty | A | Screw press | 60 MT | 4 Nos | B | Power Press | 80 MT | 2 Nos | C | Power Press | 60 MT | 3 Nos | D | Lathe | 8 FT | 2 Nos | E | shaper | 6 FT | 2 Nos | F | Tooling | 60 MT | 6 Nos | G | Landies | 2.5 INCH | 3 Nos | H | Hand Grinder | 8 INCH | 4 Nos | I | Bench Grinder | 12 INCH | 4 Nos | J | Drill | 1/2 INCH | 2 Nos | K | Drill | 1 INCH | 1 No | L | Coal Furnish | 8 FT | 4 Nos | M | Blower | 18 INCH | 4 Nos | N | Vice Bench | 10 INCH | 6 Nos | O | Bending Bench | 20 MM | 1 No | TESTING EQUIPMENTS
|
| Name of Euipments | Qty | Calibration validity | A | VERNIER | 2 Nos | 17.08.2010 | B | STEEL TAPE | 2 Nos | 17.08.2010 | C | IN-SIDE GUAGE | 6 Nos | 22.09.2010 | UAGE | OUT-SIDE GUAGE | 6 Nos | 22.09.2010 | E | SCREW GUAGE | 2 Nos | 23.02.2011 | F | MICROMETER | 1 No | 23.02.2011 | G | WEIGHING SCALE | 1 No | 23.02.2011 | H | HYDROMETER | 1 No | 23.02.2011 | I | STEEL SCALE | 2 Nos | 23.02.2011 | List of Product | A | Pin for insulator | 1.1 KV TO 33 KV (As per IS: 7935 & IS : 2486) | B | Stay sets | L.T & H.T (AS PER SPECIFICATION) (BS-16) | C | Earthing Set | Rod Type, Pipe Type & Coil Type (As per IS:2062, IS:1239 & IS: 280) | D | String Hardware | T & C, B & S (As per IS:2486) | E | PVC Line Spacer | 1 Ph 2 Wire, 3 Ph 4 Wires (As per REC) | F | Danger Board | L.T & H.T (As per IS: 2551) | G | Connector | P.G Clamp, U.D.C, (As per IS: 5561) | H | Jointing sleeves | Pipe Type, Spiral Type (As per IS:12048) | I | Suspension Clamp | L.T & H.T ABC (As per IS:2486) | J | Dead-End-Clamp | L.T & H.T ABC (As per IS:2486) | K | Piercing Connector | L.T & H.T | L | Shackle Hardware | As per IS: 7935 | M | D-Iron Clamp | As per IS: 7935 | N | Eye Hook | As per requirement | O | BPL-KIT | As per NHPC,NTPC,DVC, and WBSEDCL Specification. | P | Conduct pipes (HDG) | As per IS:1239 | Q | Bolts & Nuts | As per IS:1363,IS:1364 | R | Fabricated Structural | As per:2062,IS:808 |
| Material | Up To 33 KV Line
|
| a.Transmission |
| b.Distribution |
| c.Line structure. |
| d.Substation | |
|
|