At a Glance

Name of machinery
A Screw press 60 MT 4 Nos
B Power Press 80 MT 2 Nos
C Power Press 60 MT 3 Nos
D Lathe 8 FT 2 Nos
E shaper 6 FT 2 Nos
F Tooling 60 MT 6 Nos
G Landies 2.5 INCH 3 Nos
H Hand Grinder 8 INCH 4 Nos
I Bench Grinder 12 INCH 4 Nos
J Drill 1/2 INCH 2 Nos
K Drill 1 INCH 1 No
L Coal Furnish 8 FT 4 Nos
M Blower 18 INCH 4 Nos
N Vice Bench 10 INCH 6 Nos
O Bending Bench 20 MM 1 No


Name of Euipments Qty Calibration validity
A VERNIER 2 Nos 17.08.2010
B STEEL TAPE 2 Nos 17.08.2010
C IN-SIDE GUAGE 6 Nos 22.09.2010
UAGE OUT-SIDE GUAGE 6 Nos 22.09.2010
E SCREW GUAGE 2 Nos 23.02.2011
F MICROMETER 1 No 23.02.2011
G WEIGHING SCALE 1 No 23.02.2011
H HYDROMETER 1 No 23.02.2011
I STEEL SCALE 2 Nos 23.02.2011

List of Product
A Pin for insulator 1.1 KV TO 33 KV (As per IS: 7935 & IS : 2486)
B Stay sets L.T & H.T (AS PER SPECIFICATION) (BS-16)
C Earthing Set Rod Type, Pipe Type & Coil Type (As per IS:2062, IS:1239 & IS: 280)
D String Hardware T & C, B & S (As per IS:2486)
E PVC Line Spacer 1 Ph 2 Wire, 3 Ph 4 Wires (As per REC)
F Danger Board L.T & H.T (As per IS: 2551)
G Connector P.G Clamp, U.D.C, (As per IS: 5561)
H Jointing sleeves Pipe Type, Spiral Type (As per IS:12048)
I Suspension Clamp L.T & H.T ABC (As per IS:2486)
J Dead-End-Clamp L.T & H.T ABC (As per IS:2486)
K Piercing Connector L.T & H.T
L Shackle Hardware As per IS: 7935
M D-Iron Clamp As per IS: 7935
N Eye Hook As per requirement
O BPL-KIT As per NHPC,NTPC,DVC, and WBSEDCL Specification.
P Conduct pipes (HDG) As per IS:1239
Q Bolts & Nuts As per IS:1363,IS:1364
R Fabricated Structural As per:2062,IS:808

Up To 33 KV Line



c.Line structure.


Get in touch with us
RFQ Request For Quotation
Get Quotes For Your Buying Requirement. Tell Suppliers What You Need.
I agree to abide by all the Terms and Conditions of